This page describes the commissioning of a tubular linear motor with the TKSED software. The software is used to parameterize the drive and the motor for the linear application.
Download the TKSED Software here: :mbd_servo_drive:nilab_byinterface-ver10.4.0_6_.zip
PDF Document: :mbd_servo_drive:tksed_linearmotor_parameterization_rev0.pdf
- Parameterization of the drive for a tubular linear motor. - Setting the motor feedback, the pole pitch, and the commutation parameters. - Commissioning and testing of the linear motion. - The PDF document describes the parameterization procedure step by step.
- Download and install the TKSED software from the link above. - Connect the drive to the PC with the programming cable. - Follow the parameterization procedure described in the PDF document. - After commissioning, verify the motor operation and the position feedback.