Table of Contents
Power cable
This page describes the power cable of the RM linear stage. The stage is equipped with a 1-meter cable with an M23 standard Speedtec connector at the cable end.
The linear stage is equipped with a 1-meter cable with an M23 standard Speedtec connector at the cable end.
Pinout - Power connector BKUA145NN00420200400 (Serie 923 - 9 poles)
| PIN | Signal |
| A | U phase |
| B | V phase |
| C | W phase |
| D/PE | Protection Earth |
| F | Thermal switch+ |
| G | Thermal switch- |
| L | not connected |
| H | not connected |
| CASE | Shield |
Wiring notes
- The cable is supplied with a 1-meter length and an M23 Speedtec connector. - The connector is a 9-pole type (Serie 923) with the pin assignment shown above. - Connect the phases (U, V, W), the protection earth, and the thermal switch. - Verify the pin assignment and the cable routing before commissioning.