Fulltext results:
- Expert Mode @nilab_starter
- ange the pole pitch use for determining the right mechanical position ⇒ Parameter 66 - change the PWM frequency => Parameter 86 ===== Electrical angle to Mechanical angle using pole pitch value ===== Please consid... 66 is used to convert the electrical angle to the mechanical angle ⇒ mechanical positions. The right number in respect to the motor size are: |**Motor size** |**Pole pi
- Requirements on the design
- stiff coupling of the motor to the weight. ==== Mechanical rigidity ==== In conjunction with the mass and t... esonant frequency, the rigidity of the individual mechanical components within a machine chiefly determines th... ity of a motion axis is determined by the overall mechanical structure. The goal of the construction must be t... d loop bandwidth of linear drives required higher mechanical natural frequencies of the machine structure in o
- Application range
- ems consisting of a rotating electrical motor and mechanical transmission elements, i.e. gearboxes, belt trans... sitioning behavior * Direct power transfer – no mechanical transmission elements like ball screws, toothed b... stallation into the machine, there are no wearing mechanical components. This means there is a power train wit... nts in quick succession lead to premature wear of mechanical parts and thus to failures and significant costs.
- Maintenance @green_drive_iso
- ow: * Check all electrical connections and all mechanical components and their safety operation * Check a... or stop * Check machine mechanics arrangement (mechanical installation) |{{:integrated_drive_motors:warnin... avy injury or damage by failure or malfunction on mechanical or electrical components! \\ \\ Risk of injury o... gnal cables * Check the state of linear guides (mechanical components) evaluation wear and state of lubricat
- Maintenance @green_drive_motors
- ow: * Check all electrical connections and all mechanical components and their safety operation * Check a... or stop * Check machine mechanics arrangement (mechanical installation) |{{:integrated_drive_motors:warnin... avy injury or damage by failure or malfunction on mechanical or electrical components! \\ \\ Risk of injury o... gnal cables * Check the state of linear guides (mechanical components) evaluation wear and state of lubricat
- Maintenance @integrated_drive_motors
- ow: * Check all electrical connections and all mechanical components and their safety operation * Check a... or stop * Check machine mechanics arrangement (mechanical installation) |{{:integrated_drive_motors:warnin... avy injury or damage by failure or malfunction on mechanical or electrical components! \\ \\ Risk of injury o... gnal cables * Check the state of linear guides (mechanical components) evaluation wear and state of lubricat
- Glossary
- oder**: A position-sensing device that translates mechanical motion into electronic signals used for monitorin... tor.\\ **Resonance** \\ Oscillatory behavior in a mechanical body when subjected to a periodic force occurring... logic multiplication factor.\\ **Resolution**, **Mechanical** \\ The smallest increment that can be controlle
- Protection
- itching off the power supply contactor or by safe mechanical locking of moving parts. \\ Secure vertical axes ... ly harm caused by crushing, shearing, cutting and mechanical shock!** \\ Observe general installation and safe
- Green Drive in Parallel drive @green_drive_motors
- the ability to keep the parallel axis square). In mechanical driven systems (screw driven, rack and pinion, be... e to misalignment or stacked up tolerances of the mechanical system. In direct drive systems there is an added
- Attraction force @ironcore_motors
- e forces must always be taken into account in the mechanical design of the system.\\ Depending on the motor ar... ir gap between the primary and the secondary. The mechanical design must provide sufficient rigidity.\\ Note:
- Installation tolerances @ironcore_motors
- signed with respect to the acting forces.\\ Also, mechanical guiding must be designed to withstand:\\ • Static... se stated, the catalogue parameters apply to the (mechanical) air gap of 0.5 mm. In case of using other than c
- General Motor Configuration @mbd_servo_drive
- check if the encoder is working correctly, using Mechanical angle information. When you rotate the shaft of the motor in clockwise direction the Mechanical angle value must increase from 0 to 360 degress.
- Elmo Servo Drive @miniature_motors
- he slider of the motor in a position to avoid the mechanical stop interaction. With 1,2 on the displacement th... offset move the slider in a position to avoid the mechanical stop interaction and press the button Run commuta
- Safety instruction
- ly harm caused by crushing, shearing, cutting and mechanical shock!| ==== General Information ==== * **NiL
- Epulse30 Mechanical Dimensions @epulse50_dc_servodrive
- ====== Epulse30 Mechanical Dimensions ====== 3D Model (Step format): {{:epulse50_dc_servodrive:ftd30_20200618