Fulltext results:
- Glossary
- f mass offset from the balance point of a bearing system.\\ **Closed Loop: **Implementing feedback to regu... a parallel misalignment between a linear bearing system and the linear feedback element.\\ **Current**: T... or mounting surface to which the module or gantry system is fixed will affect the flatness of the system.\\ **Friction** \\ Resistance to motion of two surfaces t
- Green Drive in Parallel drive @green_drive_motors
- few) the main issue that arises is binding of the system due to misalignment or stacked up tolerances of the mechanical system. In direct drive systems there is an added issue ... is to drive and control each side of the parallel system and electronically sync them. First, the cost of such a system is higher since it requires twice the electronics
- Repeatability @green_drive_motors
- tor. In general repeatability is a measure of the system’s consistency to achieve identical results across multiple tests. In case of positioning system, monodirectional repeatability is the system's capability to reach the same position value for identical ... mmanded position. ===== Description of measuring system ===== The Green Drive linear motor, equipped wit
- ULCO 44/66/88/132 - Belt driven linear units @ulco
- e in 44/66/88/132 sizes) offer a complete modular system engineered to deliver high-performance movements ... of the aluminum profile's cross-section give the system exceptional mechanical strength, making it self-s... eration\\ • Resistance to bending and torsion\\ • System inertia\\ • Durability and maintenance intervals\\ • Maximum stroke\\ • System efficiency The standardization of components, co
- Analog control @integrated_drive_motors
- with an additional M12 connector. See connection system pinout:[[:integrated_drive_motors:connection_system|https://www.nilab.at/dokuwiki/doku.php?id=integrated_drive_motors:connection_system|]] ===== Analog current (4 to 20 mA) ===== The ... he loop on their processes or to control a larger system. For these cases, NLi models are available with m
- Liquid Cooled Motors (LK) @ironcore_motors
- ion_symbol.jpg}}| \\ **Do not connect the cooling system to a regular water line!** \\ \\ Using regular, ... ated water can cause severe damage to the cooling system and it is to be avoided in any circumstance.| ==... nnecting the linear motor to the external cooling system a spanner of appropriate size must be used to sup... elow). Failure to do so may result in the cooling system leakage or in a complete failure of the linear mo
- IP protection and Cooling @green_drive_iso
- y motor surface (IC40). An additional fan cooling system, also available with IP55 protection, or Typhoon compressed air cooling system which can provide up to 90% of performance improv... y. NiLAB GmbH does not provide any liquid cooling system for the Green Drive series actuators. ==== Prote
- IP protection and Cooling @green_drive_motors
- y motor surface (IC40). An additional fan cooling system, also available with IP55 protection, or Typhoon compressed air cooling system which can provide up to 90% of performance improv... y. NiLAB GmbH does not provide any liquid cooling system for the Green Drive series actuators. ==== Prote
- Linear guiding system @ironcore_motors
- ====== Linear guiding system ====== To design the linear system NiLAB can provide the correct linear guide type to meet the requireme... the standard mechanical configuration, the linear system is composed of two rails and at least 4 carriages
- Type codes @green_drive_iso
- CUMENT** |**LINK** | |Ordering code - Single code system|[[https://www.nilab.at/download/order-codes-single-code-system/?wpdmdl=2627&refresh=62a6e4f34bd731655104755|Sing
- Accessories @green_drive_motors
- o connect the payload with the slider, a coupling system is needed to transmit the linear force only, to g... cessories ==== 3D Model files of the FAN cooling system for GD250/GD350: {{:green_drive_motors:fan_coolin
- Type codes @green_drive_motors
- CUMENT** |**LINK** | |Ordering code - Single code system|[[https://www.nilab.at/download/order-codes-single-code-system/?wpdmdl=2627&refresh=62a6e4f34bd731655104755|Sing
- PLC Control of 2 motors with synchronization @integrated_drive_motors
- on see here:[[:integrated_drive_motors:connection_system|https://www.nilab.at/dokuwiki/doku.php?id=integrated_drive_motors:connection_system|]] 2 outputs line must be provided from the PLC:
- Type codes @integrated_drive_motors
- CUMENT** |**LINK** | |Ordering code - Single code system|[[https://www.nilab.at/download/order-codes-single-code-system/?wpdmdl=2627&refresh=62a6e4f34bd731655104755|Sing
- Connectors @integrated_rotolinear
- please see: [[:integrated_drive_motors:connection_system|https://www.nilab.at/dokuwiki/doku.php?id=integrated_drive_motors:connection_system|]]