Action unknown: siteexport_addpage
meta data for this page
MBD 230/400 Servo Drive
MBD is a new range of low-cost, high-power servo drives. Five sizes are available, ranging from 3 A to 42 A continuous operation. The drive is offered with EtherCAT, CANopen, or analog control, and includes a wide range of feedback options.
Controllable motors:
| Item |
| Brushless synchronous motors with torque, speed, and position control |
| Brushless linear motors |
Available motor feedback:
| Item |
| Encoder with Hall (standard) |
| SIN/COS 1Vpp |
| Absolute Hiperface |
Catalogue Sheet
Hardware features
| Item |
| CANopen slave (DS402 profile) |
| EtherCAT interface |
| Modbus RTU |
| A-B-Z type encoder emulation |
| Integrated brake-clamp resistance with monitoring |
| 5 opto-isolated inputs and 3 configurable outputs |
| 2 inputs for disabling safety STO A, STO B |
| 2-line display |
| 1 drive-OK relay |
| RS232 interface for configuration and data transfer |
| External power line for the logic circuit (24 VDC) |
Software features
| Item |
| Absolute positioner on the fieldbus interface (CANopen slave) or via I/O with homing input |
| Profile position mode, velocity mode, and interpolation position mode |
| Emergency braking with static position control |
| ±10 V analog input |
| Settable PID regulation |
| Torque and speed control via digital input |
| Advanced function monitoring through the RS232 interface with oscilloscope emulation |