Action unknown: siteexport_addpage
meta data for this page
Encoder cables
This page shows the encoder cables available for the NL7-EC servo drives. The cables are grouped by motor frame size and by connector type.
Motor frame size 80 mm or below
AMP connector - CABLE-7BM*-Z(V3.0)
Aviation connector - CABLE-7BM*-HH2
Direct connector - CABLE-BMAH*M*-124-TS - Absolute encoder
Motor frame size 130 mm
Aviation connector - CABLE-/BM*HZ(V3.0)
Notes
- The cable type depends on the motor frame size and the encoder option. - The AMP and aviation connectors are used with the standard feedback; the direct connector is used with the absolute encoder. - Select the cable according to the drive port and the encoder type. - Refer to the ordering code page for the complete cable ordering code.