meta data for this page
Technical Data
This page gives the technical data of the Epulse10 servo drive. The table lists the main electrical and performance parameters.
| PARAMETER | UNIT | EPULSE10 |
| Rated Voltage | V | 24 - 48 |
| Peak current (10 sec) | A | 15 |
| Rated current | A | 7 |
| Rated output power | W | 170 |
| Default pwm frequency | kHz | 20, programmable (8,10.15kHz) |
| Protection degree | level | IP20 |
| Digital Input | qty | 2 |
| Digital Output | qty | 3 |
| Fieldbus | type | CANopen, EtherCAT |
| Feedback options | SIN/COS 1Vpp | |
| Operating temp | degrees | 0 to 40 celsius |
| Weight | gramms | 250 |
Notes on the data
- The drive operates with a 24–48 VDC supply and delivers up to 15 A peak (10 s). - The default PWM frequency is 20 kHz; it can be set to 8 or 10.15 kHz. - The drive supports CANopen and EtherCAT fieldbuses and SIN/COS 1Vpp feedback. - The protection degree is IP20; the operating temperature range is 0 to 40 °C.